main-image
ImageSetByPath

MEGR-1652-DFG

Visit Product Series:

These second stage regulators are used to reduce outlet pressures from first stage regulators (normally 10 PSI) to a range of 12- 24″ WC in domestic installations. The elevated outlet pressure range allows the use of these regulators models in applications where something above 11″ WC (normal outlet pressure) but below 2 PSI (2 PSI system pressure) is desired. Some appliances, burners, generators and similar high demand applications operate ideally at pressures above typical domestic regulator (nominal 11″ WC) outlet pressures.

Markets
Applications
Inlet 3/4″FNPT
Maximum Capacity in BTU H LPG 1 1200000
Outlet 3/4″FNPT
Outlet Adj Range WC 46015
Outlet Set Point WC 18
product type Full Size Back Mount
specification Type: Second Stage / Full Size|Max. Inlet Pressure: 10 PSIG|Exterior Finish: Green Powder Coat|Interior Finish: Green Powder Coat|Orifice Size: 0.219|Diaphragm: Fabric Reinforced (NBR) Molded Lip O-Ring Bonnet/Body Seal|Relief Type: Internal Relief - Spring Loaded|Bonnet / Body Material: Die Cast Aluminum|Seat Material: Fluorocarbon (FKM)|Mounting Holes: Standard 3-1/2″ Center|Pressure Taps: #54 Orifice 1/8″ FNPT Plugged (2)|Relief Travel Stop: Molded In Adjustment Cap: Black
Type Back Mount